69
PN: 50019
PN: 50019
PN: 50020
PN: 50020
5.375 inch diameter
GO FUEL
GO FUEL IN-TANK RETROFIT KITS
IN-TANK RETROFIT KITS
If you’re running a fuel cell or custom tank, this Pump Module is the solution to your high pressure fuel needs. The billet top
assembly is machined with a 2” filler assembly as well as an internal regulator to maintain 58-psi. This system is designed so no
return line is needed! The Module is machined to fit fuel cells with a 12-bolt flange or can be installed on any tank with the
supplied hardware. The single pump module supports up to 800 hp, while the dual pump module supports up to 1,600 hp.
FUEL CELL PUMP MODULES
FUEL CELL PUMP MODULES
FILLER NECK/CAP SPACERS
FILLER NECK/CAP SPACERS
A
B
C
A
B
C
WARNING: Cancer or Reproductive Harm
www.P65warnings.ca.gov
                                                                                 Not legal for use on Emissions Controlled Vehicles. 
Check with your local DMV, emissions testing facility or applicable State laws before installing. 
Emission Controlled Vehicle Information: 

View this content as a flipbook by clicking here.